Testing Procedures Manual
Volume II - Part VII - Adhesives
DOTD TR 701
|
Volatile Content of Epoxy Resin Systems |
|
Effective 10/1/15, This procedure is no longer used, refer to AASHTO M235, Epoxy Resin Adhesives
|
| |
|
DOTD TR 702
|
Consistency of Epoxy Resin Systems |
| |
Effective 10/1/15, This procedure is no longer used, refer to AASHTO M235, Epoxy Resin Adhesives |
| |
|
DOTD TR 703
|
Gel Time Determination of Epoxy Resin Systems
|
| |
Effective 10/1/15, This procedure is no longer used, refer to AASHTO M235, Epoxy Resin Adhesives |
| |
|
DOTD TR 704
|
Water Absorption of Epoxy Resin Systems |
| |
Effective 10/1/15, This procedure is no longer used, refer to AASHTO M235, Epoxy Resin Adhesives |
| |
|
DOTD TR 705
|
Compressive Strength of Epoxy Resin Systems
|
| |
This method of test is intended to determine the compressive strength of cured epoxy resin systems
|
| |
|
DOTD TR 706
|
Tensile Bond Strength of Epoxy Resin Systems
|
METHOD A
METHOD B |
This method of test is intended to determine the dry-cured tensile bond strength of hardened cement mortar bonded with epoxy to hardened cement mortar. It is also used as a measure of set time properties of Type V epoxy resin systems
|
| |
|
DOTD TR 707
|
Diagonal Shear Bond Strength of Epoxy Resin Systems
Effective 2/6/2019, this procedure is no longer used, refer to ASTM M235 - Epoxy Resin Adhesives |
|
|
DOTD TR 708
|
Property Retention of Epoxy Resin Systems |
| |
Deleted |
| |
|
DOTD TR 710
|
Compressive Strength of Epoxy-Urethane for Overlay Systems |
| |
This method of test is intended to determine the compressive strength of cured epoxy-urethane overlay systems
|
|